Simple design; Easy to adjust; Built-in ultra-bright display; Intuitive software; Hot-swap batteries; Compatibility with wide range DSLR cameras and professional cinema cameras; Compatibility with cable cams, drones, cranes, Steadicams, etc.
Specifications:Integrates a Lidar module, an RGB camera, and a high-accuracy IMU High Efficiency 2 km2 covered in a single flight High AccuracyVertical Accuracy: 5 cm Horizontal Accuracy: 10 cmPoint Rate: 240,000 pts/s Supports 3 Returns Detection Range: 450 m (80% reflectivity, 0 klx) IP44 Ingress Protection Level Point...
Specifications:Accuracy without GCPs 3 cm horizontally / 5 cm vertically; High Efficiency 3 km2< covered in a single flight; 45 MP Full-frame Sensor 45 MP Full-frame (35.9×24 mm) Sensor; 3-axis Stabilized Gimbal Smart Oblique Capture; Global Mechanical Shutter , Shutter Speed 1/2000 Seconds; TimeSync 2.0 - synchronization...
Specifications:The DJI Zenmuse Z30 camera is the first aerial camera of DJI with 30x optical and 6x digital zoom; The TapZoom allows you to zoom immediately the subject of your inspection just by tapping on the display of your mobile device; Precise stabilization thanks to DJI’s Zenmuse gimbal technology; The DJI Zenmuse Z30 camera is created...
3-axis stabilization; Stiff and lightweight aluminium frame; 3 powerfull brushless motors; Special anti-vibration pad; Suited for BMPCC camera; Compatible with S800, S900 and S1000 copters from DJI
The Ronin-SC Multi-Camera Control Cable (Multi-USB) connects the camera control port of Ronin-SC to the MultiPort on a Sony camera to fully control the camera. Specifications:Length: 200 mm.Compatibility:Ronin-SC.
The Ronin-SC Multi-Camera Control Cable (Type-C) connects a camera with a Type-C port to the Camera Control Port of Ronin-SC for camera control. Specifications:Length: 200 mm.Compatibility:Ronin-SC.
The Ronin-SC Multi-Camera Control Adapter (Type-C to Micro-USB) allows the Ronin-SC Multi-Camera Control Cable (Type-C) to connect with cameras with a Micro-USB port, allowing you to control the Fuji X-H1, X-T2, and X-T3 Series cameras. Specifications:Length: 28 mm mm.Compatibility:Ronin-SC.
The BG18 Grip makes Ronin-SC compatible for handheld use. A 2450 mAh built-in battery powers the gimbal for up to 11 hours. Specifications:Model: RB2-2450mAh-7.2V; Battery Type: 18650 LiPo Battery Rated Capacity: 2450 mAh; Energy: 17.64 Wh.Compatibility:Ronin-SC.
The DJI Ronin Cheese Plate uses its 1/4"-20 and M4 tapped hole to mount onto the M4 tapped holes on the side of the gimbal or other accessories. Compatibility:Ronin-S Ronin-SC Ronin-S2 Ronin-SC2
Ronin-S/SC Camera Riser is attached under the camera to mount and balance onto the Ronin-S/SC. Specifications:Dimensions: 48×40×11 mm.Compatibility:Ronin-S Ronin-SC
Controls camera focus, iris, and zoom. Ronin Focus Motor required and sold separately. Compatibility:Ronin-S Ronin-SC Ronin-S2
The Ronin-SC Focus Motor works with the Ronin-SC Focus Wheel to control the camera focus, providing optimal shooting experience with a compact, low-noise design. Specifications:Weight: 88 g; Dimensions: 71×47×34 mm; Max Torque: 0.2 Nm; Max Operating Speed: 100 RPM; Operating Current: Free current: 50 mA (5 V); Operating Voltage: 5 V...
The Ronin-S Battery Adapter is designed to charge the Ronin-S Grip without being attached to the gimbal by connecting it directly to a power outlet. The grip can also work as a portable power bank to charge external devices (e.g., mobile devices, tablets) connected to the adapter's USB-A port. Specifications:Model: RSBA1; Input (USB-C port): 5 V/2...
The Ronin-S DC Power Cable connects a camera to the 12V accessory power port on the Ronin-S. The other end of the cable steps down the power to 7.4 V/1 A and must be connected to a compatible aftermarket dummy battery based on your camera model (not provided by DJI and must be purchased separately). Compatibility:Ronin-S.
The Multi-Camera Control USB Female Adapter is used with your camera's USB cable to connect your camera and the Ronin-S Camera Control Port, allowing you to control your camera via the Ronin-S Camera Control Button. Please refer to the Ronin-S Camera Compatibility List for more information on the supported camera models, control features, and camera...
With the grip, you can conveniently hold your DJI Ronin-M/ DJI Ronin-MX or simply lean it against the vertical surface when you are not using it. Expansion screws are also available for personal optimization.
Ronin-S Top Hotshoe Bracket is used to more securely mount a DLSR camera to the Ronin-S. It is recommended to mount the camera using a Top Hotshoe Bracket when mounting the gimbal on a car. Compatibility:Ronin-S.
The Ronin-S Focus Motor is used with the Ronin-S Focus Wheel to control the focus, iris, and zoom. In the Box:Focus Motor × 1; Rod Mount × 1; 15 mm Rod × 2; Screw × 4; Focus Gear Strip × 2; Power Cable × 1.Compatibility:Ronin-S.
Professional high-resolution cameras and gyroscopic stabilized gimbals DJI Ronin for professional use. Cameras for drones - installation on flying platforms such as Quadcopters, Hexacopters and Octocopters. Extremely precise gimbals for installation on flying platforms or studio shooting cranes with professional digital camera with 4K resolution. In addition to the gimbal, the mounted camera on them, can be controlled with wireless controller that allows you to capture exactly what you want, exactly as you want it. DJI gimbals are compatible with cameras from Canon, Panasonic, BlackMagic and Sony.