In the box:
Warning: Last items in stock!
Availability date: 04/30/2016
DJI Ronin 2 allows the film makers to take the scenes exactly as they imagine them. The upgraded high torque motors of the system allow compatibility of the DJI Ronin 2 with a wide range of cameras, which also makes the new Ronin resistant to strong wind and G-forces. Thanks to the renewed motors, Ronin 2 will be able to move smoothly during a flight or when mounted on a car.
Whether it's an ordinary DSLR camera or a professional cinema camera fitted with all the accessories, DJI Ronin 2 will professionally stabilize every footage.
Supported cameras: RED Dragon, ARRI Alexa Mini, Black Magic Ursa Mini, Canon C300, Sony FS7.
The new design of the detachable grip for DJI Ronin 2 allows it to stay upright. You can also remove the bottom of the holder if you do not need it. Ronin 2 is also compatible with cable cams, drones, cranes, Steadicams and many more.
DJI Ronin 2 has a simplified design that makes setup and use easier than ever. All system details are refined for greater convenience and speed during shooting - from camera mounting to balancing and system setup, accessory equipment, and transportation.
In DJI Ronin 2 is integrated a special ultra-bright touch screen, which serves to accelerate tuning and rationalization of the gimbal. The sensor buttons, including temporary shutdown, are now easy available.
Extremely refined, redesigned, and advanced Gimbal Assistant app helps the user to capture frames with minimal effort with new features such as CamAnchor, Timelapse and Panorama, providing more intuitive and easy-to-use full control system for DJI Ronin 2.
Improved intelligence means that film makers can now get photos with DJI Ronin 2, which in the past would need specialized expertise or additional equipment.
The power systems are fully integrated into the DJI Ronin 2, which allows power to the motors and the camera and used accessories. The advantage is: you do not need additional cables or additional power systems. Ronin 2 uses a dual-battery system that film makers can replace during the work of the gimbal. Thus, the camera and accessories will be constantly powered, resulting in greater performance.
DJI Ronin 2 is powered by 2 batteries, but you can remove one of them and replace it during creating scenes. You do not even need to turn off the Ronin. This will allow you to replace both batteries, and you won’t need to interrupt the shooting process.
Mounting cameras, monitors or accessories, including the DJI Focus, can be powered by DJI Ronin 2 batteries via integrated cables and ports, eliminating the dangling wires.
Each element of DJI Ronin 2 is designed to increase reliability (from materials to engine design, cable connection and security). All this creates a system that stands out with its qualities even in the most damaging of shooting conditions.
High power and sustainable in extreme weather conditions, DJI Ronin 2 self-heating batteries provide stable power for high performance at very low negative temperatures (up to -20˚C) or very high positive temperatures. Dual batteries, which can operate both simultaneously and independently, provide great reliability that will keep you shooting continuously (eliminating the need to interrupt the shooting process to replace the batteries).
Built-in GPS provides to DJI Ronin 2 an important information on the acceleration and speed of the gimbal, which is critical to maintaining the camera's position and horizon level when driving at high speeds.
|DJI Ronin 2|
Built-in, independent IMU module
|Camera Tray Dimensions||Maximum depth from the center of gravity on camera base plate: 245 mm|
Maximum height measured from top of the camera base plate: 165 mm
Maximum width: 180 mm
|Accessory Power Connections||14.4 V x 4 Camera Cage (Combined 8 A), 12.6 V x 2 Pan Motor (Combined 4 A), 12.6 V x1 P-Tap (8 A)|
|GCU Input Power||Intelligent Battery: 4280 mAh-22.8 V|
|Connections||2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C|
|PC Assistant Software Requirements||Windows 7 or above; Mac OS X 10.11 or above|
|Mobile Assistant Software Requirements||iOS 9 or above; Android 4.4 or above|
|Mechanical & Electrical Characteristics|
|Working Current||Static current: 300 mA (@22.8 V)|
Dynamic current: 500 mA (@22.8 V)
Locked motor current: Max 15 A (@22.8 V)
|Run Time||8 hours|
2.5 hours (when powering gimbal, camera and accessories at the same time)
|Operating Temperature||-20° to 50° C|
|Weight||Including handle bar: 5.5 kg|
Excluding handle bar: 4.2 kg
|Gimbal Dimensions||Excluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H)|
Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)
|Load Weight (Reference Value)||13.6 kg|
|Angular Vibration Range||± 0.02°|
|Maximum Controlled Rotation Speed||Pan axis: 400°/s|
Tilt axis: 360°/s
Roll axis: 360°/s
|Mechanical Endpoint Range||Pan axis control: 360° continuous rotation|
Tilt axis control: ±135°
Roll axis control: ±220°
|Controlled Rotation Range||Pan axis control: 360° continuous rotation|
Tilt axis control: +45° to -135°
Roll axis control: ±45°