Sale! DJI Matrice 210 V2 + DJI Zenmuse XT Thermal Imaging Camera + DJI Zenmuse Z30 Camera

DJI Matrice 210 V2 + DJI Zenmuse XT Thermal Imaging Camera + DJI Zenmuse Z30 Camera

In Stock

Specifications for DJI Matrice 210 V2 :

  • OcuSync 2.0 system, which supports automatic dual frequency band switching;
  • Possibility of mounting third-party payloads from other manufacturers;
  • Discreet Mode for unobtrusive drone operations;
  • AES-256 encryption keeps your data transmission secure;
  • FlightAutonomy system with front, bottom and upper sensors detects and avoids obstacles;
  • Equipped with new top and bottom anti-collision beacons;
  • DJI AirSense technology for providing real-time air traffic information;
  • Self-heating battery system for maximum flight time of 38 minutes;
  • DJI Pilot is an app developed specifically for enterprise users.

Specifications for Zenmuse XT (ZXTA13FP V2) Thermal Imaging Camera :

  • The DJI Zenmuse XT Thermal Imaging Camera is developed by DJI and FLIR;
  • Professional flexibility and parameters;
  • Thermal image in real time on your tablet or smartphone;
  • Compatible with DJI Inspire 1, DJI Matrice 100, DJI Matrice 200 and DJI Matrice 600;
  • The most modern technology for clear picture: DDE, SSO, ACE и IBHEQ;
  • Fully controllable via DJI GO App;

Specifications for DJI Zenmuse Z30 Camera :

  • The DJI Zenmuse Z30 camera is the first aerial camera of DJI with 30x optical and 6x digital zoom;
  • The TapZoom allows you to zoom immediately the subject of your inspection just by tapping on the display of your mobile device;
  • Precise stabilization thanks to DJI’s Zenmuse gimbal technology;
  • The DJI Zenmuse Z30 camera is created for industrial needs like wind turbines inspection, cell towers inspection, firefighting, etc.
  • The DJI Zenmuse Z30 aerial camera is compatible with all drones from the Matrice 100, Matrice 200 и Matrice 600 Series.

More details

26,838.00 BGN tax incl.


31,950.00 BGN tax incl.

Кредитен модул УниКредит
Кредитен модул Париба лични финанси
на 6 вноски по 4616.26 лв.

Вземи желания продукт сега, избери подходяща за теб схема на изплащане:

Не е нужно да избираш, може да имаш всичко!
Купи на равни вноски стоки от 100 до 30000 лв., избери най-подходящата за теб вноска.
С TBI Pay, пазаруването е лесно, гъвкаво и напълно онлайн.
Контролът е в твоите ръце, не чакай.

Виж схемите, които предлагаме
Добави в количката
Заяви и купи сега

For Bulgaria: free shipping for orders over 260€!

Built to Endure. Engineered to Adapt.

Matrice 200 V2

The ultimate platform for aerial productivity combines a rugged design and simple configurability to work as a solution for a variety of industrial applications. Improvements to the M200 Series V2 enhance intelligent control systems, flight performance, and add flight safety and data security features.

Versatile platform

Matrice 200 V2

FPV Camera

Anti-collision Beacon

Discreet Mode

Mobile SDK Compatibility

DJI SkyPort Compatibility


Onboard SDK Compatibility

Power Onboard Devices

Compatible Payloads

Compatible Payloads for Matrice 200 V2

Intelligent Controls


Enjoy a more reliable and stable flight with the new OcuSync 2.0 system, which supports automatic dual frequency band switching and extends flight range to up to 8km.


When multiple payloads or third-party payloads are installed, users can readjust the drone’s center of gravity in the DJI Pilot app, enhancing flight performance and safety.

Data Accuracy

The TimeSync system continuously aligns the flight controller, camera, GPS module, RTK module for the M210 RTK V2, as well as payloads or onboard accessories. The position data is fixed to the center of the CMOS for precise geotagging when using DJI payloads.

Discreet Mode

When the situation calls for unobtrusive drone operations, especially at night, all lights can be completely turned off in the DJI Pilot app.

Safe and Secure

AES-256 Encryption

AES-256 Encryption | Matrice 200 V2

The AES-256 encryption keeps your data transmission secure so you can be sure that your critical information stays safe.

Obstacle Avoidance

Obstacle Avoidance | Matrice 200 V2

A robust FlightAutonomy system with front, bottom and upper sensors detects and avoids obstacles while enabling precision hovering so that you can fly with confidence.

Anti-Collision Beacon

Anti-Collision Beacon | Matrice 200 V2

Equipped with new top and bottom anti-collision beacons, the V2 drones are visible at night or in lowlight conditions, making operation in less than ideal conditions safer.

DJI AirSense

DJI AirSense | Matrice 210 V2

With a built-in ADS-B receiver, the DJI AirSense technology enhances airspace safety by automatically providing the operator with real-time information about nearby airplanes and helicopters.

Always Ready

1-Click Upgrade

Matrice 210 V2 Remote Controller

The remote controller, drone, payloads, RTK module, and RTK base station, can now be upgraded simultaneously with just 1-click in DJI Pilot or DJI Assistant 2.

Dual-Battery System

Dual-Battery System | Matrice 210 V2

The self-heating battery system allows a maximum flight time of 38 minutes and an operating temperature range of -20 to +50°C.

Optional Accessories to Enhance performance

Manifold 2

Manifold 2 | Matrice 210 V2

Turn your vision into reality using DJI’s onboard computer – the Manifold 2. Leverage its flexibility and expandability to build customized drone solutions and bring your robotics operations to the edge.

D-RTK 2 Mobile Station For Matrice Series

D-RTK 2 Mobile Station | Matrice 210 V2

Gain improved relative accuracy with centimeter-level precision positioning data using the D-RTK 2 Mobile Station, which supports all major global satellite navigation systems and provides real-time differential corrections.

Upward Gimbal Connector

Upward Gimbal Connector | Matrice 210 V2

Connect any compatible payload above your M210 V2 and M210 RTK V2 drones using the upward gimbal to capture data from a different aerial perspective.

External GPS Module

External GPS Module | Matrice 210 V2

Enhance positioning accuracy by using an external GPS module, especially when using an upward gimbal on the M210 V2, or when attaching onboard devices or payloads.

Purpose-Built Applications


DJI Pilot

DJI Pilot is an app developed specifically for enterprise users to control and customize their DJI drones. With development made specifically for the M200 Series V2, DJI Pilot optimizes your flight capability for peak performance.


DJI Flighthub | Matrice 210 V2

DJI FlightHub is a one-stop solution for managing your drone operations, supporting large organizations to effectively scale their aerial operations. Compatible with the M200 Series V2, you can integrate FlightHub directly into your existing fleet of DJI drones and leverage its aerial intel across your organization.

Develop Your Fleet

Payload SDK

Build imaging or robotic tools for your specific workflow needs and integrate them seamlessly on the M200 Series V2 drones. Thanks to the TimeSync feature, third-party payloads can have the position data fixed to the center of the gimbal connector for precise geotagging.

Onboard SDK

Integrate an onboard computer to analyze in-flight data, or connect third party devices.

Mobile SDK

Develop personalized mobile apps to make flight planning and on-site data collection simpler, faster and repeatable.

A Platform for Diverse Applications

Public safety

Matrice 210 V2 + XT2 + Z30

Scouting, Forensics, Aerial Overviews. Increase the efficiency of the emergency response operation while keeping pilots safe. With the use of thermal cameras and zoom cameras, pilots can instantly get accurate information about what's happening on the ground.


Matrice 210 V2 + Z30

Vertical Asset Inspections, Defects Detection, Site Mapping. Improve inspection efficiency and accuracy while lowering costs and keeping personnel safe. With the use of a zoom camera, teams can identify structural weaknesses and defects quickly and accurately from the air.


Asset Inspection, Emergency Response, Surveying. Create precise 2D and 3D models with enhanced accuracy. With the use of a high-resolution camera, teams can quickly map large areas to generate actionable insights.


Planning, Inspection, Workflow Management. Improve the efficiency and accuracy of the inspection, reducing possible risks and preserving the health of workers. Using zoom cameras, pilots can identify structural weaknesses and create a workflow management plan based on collected data.

1.Matrice 210 V2 x1
2.Remote Controller x1
3.Landing Gear x2
4.CrystalSky 7.85-inch Monitor x1
5.WCH2 Charging Hub x1
6.Intelligent Flight Battery WB37 x2
7.Intelligent Flight Battery TB55 x2
8.Battery Charger x1
9.IN2CH Charging Hub x1
10.Propeller (Pair) x4
11.Power Cable x1
12.USB Cable x1
13.Mobile Device Holder x1
14.Carrying Case x1
15.Gibmal Damper x3
16.USB Extension Cable x1
17.Remote Controller Strap x1
18.microSD Card (64 GB) x1
19.Rear Port Cover Screw x6
20.Screwdriver (set) x1
21.Cendence Control Stick Covers (Pair) x1
22.Cendence Constrol Stick Cover Mounting Key x1
23.Spare Waterproof Rear Port Cover x1

Technical Specifications for Matrice 210 V2
Matrice 210 V2
  • M210 V2:
    • Unfolded, propellers and landing gears included, 883×886×398 mm
    • Unfolded, propellers and landing gears included, 883×886×398 mm
  • M210 RTK V2:
    • Unfolded, propellers and landing gears included, 883×886×427 mm
    • Folded, propellers and landing gears excluded, 722×282×242 mm
Diagonal Wheelbase643 mm
  • M210 V2: Approx. 4.8 kg (with two TB55 batteries);
  • M210 RTK V2: Approx. 4.91 kg (with two TB55 batteries).
Max Takeoff Weight6.14 kg
Max Payload
  • M210 V2: 1.34 kg;
  • M210 RTK V2: 1.23 kg.
Operating Frequency2.4000-2.4835 GHz; 5.725-5.850 GHz
  • 2.4 GHz: ≤ 26 dBm (NCC/FCC); ≤ 20 dBm (CE/MIC); ≤ 20 dBm (SRRC)
  • 5.8 GHz: ≤ 26 dBm (NCC/FCC); ≤ 14 dBm (CE); ≤ 26 dBm (SRRC)
Hovering Accuracy (P-mode with GPS)
  • Vertical:±1.64 feet (±0.5 m) or ±0.33 feet (±0.1 m, Downward Vision System enabled)
  • Horizontal:±4.92 feet (±1.5 m) or ±0.98 feet (±0.3 m, Downward Vision System enabled)
Hovering Accuracy (D-RTK, M210 RTK V2)Vertical: ±0.33 feet (±0.1 m); Horizontal: ±0.33 feet (±0.1 m)
Max Angular VelocityPitch: 300°/s, Yaw: 120°/s
Max Pitch Angle (Dual Downward Gimbal/Single Upward Gimbal)
  • S-mode: 35°;
  • P-mode: 30° (Forward Vision System enabled: 25°);
  • A-mode: 30°
Max Pitch Angle [Single Downward Gimbal (Gimbal Connector I)]
  • S-mode: 35°;
  • P-mode: 30° (Forward Vision System enabled: 25°);
  • A-mode: 30°.
Max Ascent Speed16.4 ft/s (5 m/s)
Max Descent Speed (vertical)9.8 ft/s (3 m/s)
Max Descent Speed (vertical)9.8 ft/s (3 m/s)
Max Speed (Dual Downward Gimbal/Single Upward Gimbal)
  • S-mode/A-mode: 73.8 kph (45.9 mph);
  • P-mode: 61.2 kph (38 mph).
Max Speed [Single Downward Gimbal (Gimbal ConnectorI)]
  • S-mode/A-mode: 81 kph (50.3 mph);
  • P-mode: 61.2 kph (38 mph).
Max Service Ceiling Above Sea Level9842 feet (3000 m, with 1760S propellers)
Max Wind Resistance39.4 ft/s (12 m/s)
Max Flight Time (with two TB55 batteries)
  • M210 V2: 34 min (no payload), 24 min (takeoff weight: 6.14 kg)
  • M210 RTK V2: 33 min (no payload), 24 min (takeoff weight: 6.14 kg)
Supported DJI GimbalsZenmuse X4S/X5S/X7/XT/XT2/Z30
Supported Gimbal ConfigurationsSingle Downward Gimbal, Dual Downward Gimbals, Single Upward Gimbal
Ingress Protection RatingIP43
  • M210 V2: GPS+GLONASS;
  • M210 RTK V2: GPS+GLONASS+BeiDou+Galileo
Operating Temperature-20° to 50° C (-4° to 122°F))
Remote Controller (GL900A)
Operating Frequency
  • 2.4000-2.4835 GHz
  • 5.725-5.850 GHz
Max Transmitting Distance(unobstructed, free of interference)
  • NCC/FCC: 5 mi (8 km);
  • CE/MIC: 3.1 mi (5 km);
  • SRRC: 3.1 mi (5 km)
  • 2.4 GHz: ≤ 26 dBm (NCC/FCC); ≤ 20 dBm (CE/MIC); ≤ 20 dBm (SRRC)
  • 5.8 GHz: ≤ 26 dBm (NCC/FCC); ≤ 14 dBm (CE); ≤ 26 dBm (SRRC)
Power SupplyExtended Intelligent Battery (Model: WB37-4920mAh-7.6V)
Output Power (max)13 W (Without supplying power to monitor)
USB Power Supply1 A⎓ 5.2 V (max)
CrystalSky Monitor
  • DJI CrystalSky 7.85inch, Resolution: 2048×1536;
  • Brightness: 2000 cd/m2; Operating System: Android 5.1; Storage: ROM 128GB
Operating Temperature-20° to 50° C (-4° to 122° F)
Downward Vision System
Velocity Range<32.8 ft/s (10 m/s) at the height of 6.56 feet (2 m)
Altitude Range<32.8 feet (10 m)
Operating Range<332.8 feet (10 m)
Operating EnvironmentSurfaces with clear patterns and adequate lighting (> 15 lux)
Ultrasonic Sensor Operating Range0.33-16.4 feet (0.1-5 m)
Ultrasonic Sensor Operating EnvironmentNon-absorbing material, rigid surfaces (thick indoor carpeting will adversely affect performance)
Forward Vision System
Obstacle Sensing Range2.3-98.4 feet (0.7-30 m)
FOVHorizontal 60°; Vertical: 54°
Operating EnvironmentSurfaces with clear patterns and adequate lighting (> 15 lux)
Upward Infrared Sensing System
Obstacle Sensing Range0-16.4 feet (0-5 m)
Operating EnvironmentLarge, diffuse and reflective obstacles (reflectivity >10%)
Intelligent Flight Battery (TB55-7660mAh-22.8V)
Capacity7660 mAh
Voltage22.8 V
Battery TypeLiPo 6S
Energy174.6 Wh
Net Weight (Single One)Approx. 885 g
Operating Temperature-20° to 50°C (-4° to 122° F)
Charging Temperature5° to 40°C (41° to 104° F)
Max Charging Power180 W
Charger (IN2C180)
Voltage26.1 V
Rated Power180 W
Charging Hub (IN2CH)
Input Voltage26.1 V
Input Current6.9 A

Technical Specifications for DJI Zenmuse XT Thermal Imaging Camera Powered by FLIR:

ModelZenmuse XT
Dimensions103 mm x 74 mm x 102 mm
Weight270 g
Angular Vibration Range±0.03°
Controllable RangeTilt:-35° to +135°; Pan:±320°; Roll:±30°
Mechanical RangeTilt:-45° to +135° Pan:±320° Roll:±45°
Max Controllable Speed120°/s
Thermal ImagerUncooled VOx Microbolometer
FPA/Digital Video Display Formats640 × 512 , 336 × 256
Analog Video Display Formats720 × 480 (NTSC); 720 × 576 (PAL)
Pixel Pitch17 μm
Spectral Band7.5 - 13.5 μm
Full Frame Rates

640 × 512: 30 Hz (NTSC) 25 Hz (PAL)

336 × 256: 30/60 Hz (NTSC) 25/50 Hz (PAL)

Exportable Frame Rates7.5 Hz NTSC; 8.3 Hz PAL
Sensitivity (NEdT)

<50 mK at f/1.0

Scene Range (High Gain)

640 × 512: -13° to 275°F (-25° to 135°C)

336 × 256: -13° to 212°F (-25° to 100°C)

Scene Range (Low Gain)

-40° to 1022°F (-40° to 550°C)

Spot MeterTemperatures measured in central 4×4
File StorageMicro SD Card
Photo FormatJPEG, TIFF
Video FormatMP4
NTSC/PAL (field switchable)Yes
Image OptimizationYes
Digital Detail EnhancementYes
Polarity Control (black hot/white hot)Yes
Color & Monochrome Palettes (LUTs)Yes
Digital Zoom

640 × 512: 2x, 4x, 8x;

336 × 256: 2x, 4x

Operating Temperature Range14° to 104°F (-10° to 40 ℃)
Non-Operating Temperature Range-22° to 158°F (-30° to 70 ℃)
Temperature Shock41°F/ min (5 ℃/min)
Humidity5% to 95%

DJI Zenmuse Z30 Technical Specifications
NameZenmuse Z30
Dimensions152×137×61 mm
Weight556 g
SensorCMOS, 1/2.8"
Effective Pixels: 2.13 M
Lens30x Optical Zoom
F1.6 (Wide) - F4.7 (Tele)
Zoom Movement Speed:
- Optical Wide – Optical Tele: 4.6 sec
- Optical Wide – Digital Tele: 6.2 sec
- Digital Wide – Digital Tele : 1.8 sec
Focus Movement Time:
∞ - near: 1.1 sec
FOV63.7°(Wide) - 2.3°(Tele)
Digital Zoom6x
Min. Working Distance10 mm (Wide) - 1200 mm (Tele)
Photo FormatsJPEG
Video FormatsMOV, MP4
Working ModesCapture, Record, Playback
Still Photography ModesSingle shot, Burst shooting: 3/5 frames, Timelapse (2/3/4/7/10/15/20/30 sec)
Exposure ModeAuto, Manual, Shutter
Exposure Compensation±3.0 (1/3 increments)
Metering ModeCenter-weighted metering, Spot metering (Area option 12x8)
AE LockSupported
Electronic Shutter Speed1/1 - 1/6000 s
White BalanceAuto, Sunny, Cloudy, Incandescent, Custom (2000K - 10000K)
Video CaptionsSupported
TapZoom Range1-5
One Key to 1x ImageSupported
Anti-flickerAuto, 50 Hz, 60 Hz
Supported SD CardsMicroSD (SD / SDHC / SDXC)
Max. Capacity: 64 GB, Class 10 or UHS-1
Supported File SystemsFAT32 (≤ 32 GB)
exFAT (> 32 GB)
Angular Vibration Range±0.01°
Controllable RangeTilt: +30° to -90°, Pan: ±320°
Mechanical RangeTilt: +50° to -140°, Pan: ±330°, Roll: +90° to -50°
Max Controllable SpeedTilt: 120°/s, Pan: 180°/s
Operating Temperature14° to 113° F (-10° to 45° C)
Non-Operating Temperature-4° to 140° F (-20° to 60° C)

24 other products in the same category: